Chiller Models

LXL-80W

LXL-120W

LXL-240W

LXL-250W

LXL-340W

LXL-410W

LXL-500W

LXL-680W

LXL-830W

Capacity

W

8080

12730

23750

25170

34000

41500

50350

68000

82840

Input Power

KW

2.3

3.8

6

7.5

9

11.3

15

18.3

22.5

Freezing Water Flow

L/min

34

56

88

114

148

169

220

290

337

Inlet and Outside Pipe

Mm

φ40

φ40

φ50

φ50

φ50

φ50

φ65

φ65

φ85

Pump Power

KW

0.5

0.5

1

1

2

2

3

3

3

Tank Volume

L

45

45

120

120

180

300

300

300

350

Outside Dimesion

H×L×W

mm

850×580×950

1400×650×1300

188×1005×1300

2335×1005×1515

Refrigrant

R22

Power Supply

380V~3PH~50Hz

Flow Control Device

Capillary tube/expansion valve

Condenser

Shell and tube condenser

Evaporator

Copper coil evaporator

Features:
1,This series of products adopt key parts such as high quality compressor and pumps imported from Europe ,America that makes it energy-saving and durable.
2,Using mic-computer controlled digital thermostat with the temperature can be accurately within the scope of 3℃to25℃.
3,Equipped with opened water tank,easier and quicker forcleaning and maintenance.
4,Over-current relay,high and low pressure limit control,starting delay time,ready to alarm and display at any time.
Industrial water chiller for attention

1, unit run-time power supply voltage must be stable, considering all factors, blood pressure, the work crew to maintain the rated voltage of less than + -10%, voltage too high or too low are the adverse effects of the crew.

2, power frequency should be maintained at rated + -2%.

3, for the protection of human security, if the body leakage avoid the risk of electric shock, Shell should have a good crew, reliable ground fault protection device has been accidents, according to strict regulations require construction electrician.

4, transportation or move out room, do not impact with the ground, causing too much impact.

5, the room should have sufficient space for the installation and maintenance unit, taking into account the adequate space extubation.

6, the installation of the selected sites:

①, avoid direct sunlight installations or other heat source will be directly radiation areas.
②, from power nearly facilitate wiring.
③, solid ground strength, and the noise does not easily cause resonance of places.
④, placed in the house, choose a well-ventilated, humidity small, less suitable places.

7, to facilitate the discharge cooling water and chilled water, basic units must be installed around the gutter.

8, chilled water and cooling water undesirable not only led to the scaling of heat transfer, heat transfer efficiency from lower and the weakening performance unit will heat pipe corrosion caused major accidents, customers should be in strict accordance with the GB50050-1995 "Design of industrial circulating cooling water treatment norms "at the request of water treatment.

9, vertical flow switch should be installed in the outlet pipe into the pipes or the level of the paragraph.

10, flow switch to the direction of flow at least six times the pipeline diameter of straight pipe section; flow switch to the direction of flow at least four times the diameter of straight pipe pipeline paragraph; should not be installed in the near Bend, in the vicinity of the valve orifice and .

11, in order to prevent flow switch trembled, the water system should be all of the gas emissions out.

12, Australian customs regulation flowmeter, it is lower than the minimum flow of water in a state separate from the flow. When the water flow to meet the requirements, flow switch should remain closed state.

Specifications:low noise ,high reliability,low vibration,high efficiency
Export Markets:millde east; south america;africa
various compressors is used for air-conditioner as a replacement parts ,and they are high quality and excellent matching.

Member ID:
Password: